Contact Us Today
Restore, renew, revitalize, and protect the exterior of your South Florida business or home with the help of ACRYFIN® acrylic polymer coating and UV sealer. Apply it as a deck coating, concrete sealant, wood coating, exterior paint sealant, and more to protect the exterior of your home or business from saltwater damage, sun damage, and other elements.
Not only does ACRYFIN® successfully protect the exterior of homes, businesses, and busy public venues, but it’s also environmentally friendly, VOC-free, and non-toxic. Order ACRYFIN® coating today to protect your home or business and the environment at the same time.
- DRIVEWAY REPAIR
- DECK RESTORATION
- CONCRETE COATING
- POOL DECK RESURFACING
- DECK REFINISHING
- DECK COATING
- BOAT DOCK RESTORATION
Make sure the wood — whether it’s a deck, dock, siding, or patio — is clean and dry. Apply primer, and allow it to sit until it’s no longer tacky. This takes about 30–40 minutes
In a 5-gallon bucket, add one gallon of Sherwin Williams Super Deck Solid Stain with one gallon of ACRYFIN® acrylic polymer coating. Mix together with a high-speed paddle bit mixer to ensure the liquids are thoroughly blended together. You can use a different brand or type of acrylic solid stain besides Sherwin Williams, but we recommend this one.
When the mixture becomes smooth, allow it to sit for one minute, then continue mixing for another 30 seconds. You’ll need to make sure all the white particles are thoroughly mixed in, so this may require scraping the sides of the bucket. The mixture is ready when it is completely smooth, thin, and easy to apply.
Use a roller brush with a ¾-inch nap cover when you’re ready to apply the coating. If you’re applying the coating to rough surfaces or boards that are spread further apart, use a roller cover with a thicker nap. As you apply the coating, make sure to fill all holes, cracks, crevices, and other voids completely with the first coat.
Wait until the first coat is dry to the touch, then apply a second coat. Use the same method for applying the second coat as you did the first. Use the same type of roller cover and follow the same direction of application. You will notice that the second coat provides greater coverage for the surface.
Applying Your Acrylic Polymer Coating To Wood
Allow the coating to dry until you can walk on it. At this stage, you can apply a coat of ACRYFIN® Clear UV sealer. This provides additional UV protection and stain resistance for the surface. Apply a thin layer using a roller cover with a nap thickness of either ¼-inch or ⅜-inch. One gallon of sealer should cover up to 400 square feet.
The coating and sealant will take about three or four days to finish curing. During this time, keep any pets, people, furniture, planters, and other belongings off the surface. Once the surface has finished curing, you can use the space as you normally would.
Once the first layer of concrete coating is dry to the touch, you can apply another thin coat using the same nap thickness of roller brush, applied in the same direction. Allow this second coat to dry.
You will need to allow your concrete surface to cure for several days after applying ACRYFIN® acrylic polymer coating and UV sealer. Curing time for concrete coating takes anywhere from four to seven days. If the weather is warmer, the coating will take longer to cure. During this time, avoid placing any furniture, plants, grills, or other belongings on the surface. Pets and humans should also avoid walking on the surface while it cures.
For More Information On Applying ACRYFIN® Coating And Sealer To Your Concrete Surfaces
Order Your Industrial-Strength Coating Today
From marinas and boardwalks to pools and residential areas, ACRYFIN® is safe and effective enough to protect them all. It’s suitable for a variety of surfaces, including wood and concrete, which are notoriously difficult to seal and protect.
If you have any questions about applying ACRYFIN® to your wood deck, concrete patio, or another type of material, feel free to reach out to our team. If you’re ready to revitalize the exterior of your South Florida business or home, order ACRYFIN® acrylic polymer coating and UV sealer today.